せきそうNAGノートFDM 3D Printer Lab

Troubleshooting

Solutions for common issues encountered in practice

WarpingCritical

Edges of print lifting up

Main Causes

Insufficient bed temperature
Excessive cooling
Poor adhesion

Solutions

Increase bed temperature
Adjust fan speed
Use brim

▶ View Details

StringingModerate

Thin strings of filament during travel moves

Main Causes

Insufficient retraction
Temperature too high
Slow travel speed

Solutions

Adjust retraction
Lower temperature
Increase travel speed

▶ View Details

Layer AdhesionCritical

Poor bonding between layers

Main Causes

Insufficient temperature
Excessive cooling
Layer height too high

Solutions

Increase temperature
Adjust fan
Reduce layer height

▶ View Details

Sagging / OverhangModerate

Drooping in unsupported areas

Main Causes

Temperature too high
Insufficient cooling
Speed too fast

Solutions

Adjust temperature
Increase fan
Adjust speed

▶ View Details

Dimensional AccuracyMinor

Difference between design and actual dimensions

Main Causes

Incorrect flow rate
Loose belts
Temperature fluctuation

Solutions

Adjust flow rate
Tighten belts
Stabilize temperature

▶ View Details

Support RemovalMinor

Difficulty removing support material

Main Causes

Support density too high
Insufficient contact distance
Material choice

Solutions

Adjust density
Adjust distance
Use soluble material

▶ View Details

About Troubleshooting

• Content based on actual experience with ELEGOO Centauri Carbon

• Results may vary depending on environment and equipment

• Click each item to see detailed solution steps

• Severity indicates impact on print quality