PETG-GF (Glass Fiber Reinforced PETG)
Performance Rating
Compare All Filaments →Rated on 5 criteria: print temperature, warping, strength, creep resistance, and heat resistance (★1-5).
Print Temp
Nozzle: 230-260°C
Bed: 70-80°C
Warping
Rated
Strength
Bending Strength: (90.00 MPa)
Creep Resistance
Rated
Heat Resistance
Heat Resistance Temp: 80°C
Features
- Glass fiber reinforced PETG. High strength and dimensional stability.
- Excellent heat resistance
- Ideal for industrial use
Basic Information
Classification:Intermediate
Base Resin:Polyethylene Terephthalate Glycol + Glass Fiber
Melting Point:230-250°C
Density:1.30-1.35 g/cm³
Shrinkage Rate:0.2-0.3%
Heat Resistance:85-95°C
Recommended Settings
| Item | Recommended Value | Notes |
|---|---|---|
| Nozzle Temperature | 240-260°C | Higher than standard PETG |
| Bed Temperature | 75-85°C | Ensure adhesion |
| Fan Setting | 30-50% | Prioritize layer adhesion |
| Print Speed | 30-50mm/s | Quality focused |
| Nozzle Diameter | 0.4mm or larger | Hardened steel recommended |
| Caution | Nozzle wear caution, hardened steel nozzle required | |
Bending Strength
| Item | Measured Value |
|---|---|
| Default (Flat Layout) | |
| Bending Strength | 90 MPa |
| Flexural Modulus | N/A |
| Test Method | 3-Point Bending Test（Details） |
Stress–Strain Curve
Bending test data for this filament has not been registered yet.
The graph will be displayed once data is added.
Use Cases
Suitable Applications
- • Industrial parts
- • Jigs & tools
- • Heat-resistant parts
- • Structural parts
Pros & Cons
Pros: High strength, dimensional stability, heat resistance
Cons: Nozzle wear, rough surface, expensive
Precautions
• Hardened nozzle recommended.
• Surface may be rough; post-processing may be needed.