PLA
Performance Rating
Compare All Filaments →Rated on 5 criteria: print temperature, warping, strength, creep resistance, and heat resistance (★1-5).
Print Temp
Nozzle: 190-220°C
Bed: 50-60°C
Warping
Low warping; beginner-friendly
Strength
Bending Strength: 77.05 MPa
Creep Resistance
Not ideal for sustained loads
Heat Resistance
Heat Resistance Temp: 55°C
Features
- Low-temperature printing, minimal warping
- Biodegradable plastic
- Ideal for beginners
- Wide color variety
- Good bed adhesion without glue
- Odorless and safe
Basic Information
Recommended Settings
| Item | Recommended Value | Notes |
|---|---|---|
| Nozzle Temperature | 190-220°C | Adjust by brand |
| Bed Temperature | 50-60°C | For glass bed |
| Fan Setting | 100% | From layer 2 |
| Print Speed | 40-60mm/s | 40mm/s for quality |
| Nozzle Diameter | 0.4mm | Standard setting |
| Caution | Sensitive to moisture, store in sealed container | |
Bending Strength
| Item | Measured Value |
|---|---|
| Default (Flat Layout) | |
| Bending Strength | 77.05 MPa |
| Flexural Modulus | 2879 MPa |
| Test Method | 3-Point Bending Test（Details） |
Stress–Strain Curve
Bending test data for this filament has not been registered yet.
The graph will be displayed once data is added.
Derivatives & Variations
Various derivative filaments with enhanced properties have been developed based on PLA. Choose the optimal one according to your application.
PLA+
Enhanced impact resistance. Improved mechanical strength.
Matte PLA
Matte finish. Layer lines less visible, premium look.
Silk PLA
Glossy finish. Beautiful appearance. For decorative items.
PLA-CF
Carbon fiber reinforced. Lightweight and strong. Hardened nozzle recommended.
PLA PRO
High strength and toughness. Suitable for functional parts.
HT-PLA
High heat resistance PLA. Over 100°C with annealing.
Use Cases
Suitable Applications
- • Prototyping
- • Decorative items & figurines
- • Educational models
- • Complex shape prototypes
- • Architectural models
- • Toys & gadgets
Pros & Cons
Precautions
• Absorbs moisture easily, store in sealed container recommended.
• May deform in environments above 60°C.
• Weak layer adhesion, not suitable for parts requiring mechanical strength.
• Degrades under direct sunlight, avoid outdoor use.