ABS-CF (Carbon Fiber Reinforced ABS)
Performance Rating
Compare All Filaments →Rated on 5 criteria: print temperature, warping, strength, creep resistance, and heat resistance (★1-5).
Print Temp
Nozzle: 240-270°C
Bed: 90-110°C
Warping
Rated
Strength
Bending Strength: (95.00 MPa)
Creep Resistance
Rated
Heat Resistance
Heat Resistance Temp: 100°C
Features
- Carbon fiber reinforced ABS. Lightweight and strong.
- Used in aerospace applications
- Excellent rigidity
Basic Information
Classification:Advanced
Base Resin:Acrylonitrile Butadiene Styrene + Carbon Fiber
Melting Point:220-240°C
Density:1.10-1.15 g/cm³
Shrinkage Rate:0.4-0.6%
Heat Resistance:95-105°C
Recommended Settings
| Item | Recommended Value | Notes |
|---|---|---|
| Nozzle Temperature | 240-260°C | Higher than standard ABS |
| Bed Temperature | 95-110°C | High temp to prevent warping |
| Fan Setting | 0-20% | Prioritize layer adhesion |
| Print Speed | 30-50mm/s | Quality focused |
| Nozzle Diameter | 0.4mm or larger | Hardened steel required |
| Caution | Enclosed chamber recommended, ventilation required | |
Bending Strength
| Item | Measured Value |
|---|---|
| Default (Flat Layout) | |
| Bending Strength | 95 MPa |
| Flexural Modulus | N/A |
| Test Method | 3-Point Bending Test（Details） |
Stress–Strain Curve
Bending test data for this filament has not been registered yet.
The graph will be displayed once data is added.
Use Cases
Suitable Applications
- • Aerospace parts
- • Drone parts
- • High-performance jigs
- • Lightweight structures
Pros & Cons
Pros: Lightweight, high rigidity, heat resistance
Cons: Nozzle wear, prone to warping, expensive
Precautions
• Hardened nozzle required.
• Enclosed chamber printing strongly recommended.
• Toxic fumes; ventilation required.