ABS-GF (Glass Fiber Reinforced ABS)
Performance Rating
Compare All Filaments →Rated on 5 criteria: print temperature, warping, strength, creep resistance, and heat resistance (★1-5).
Print Temp
Nozzle: 240-270°C
Bed: 90-110°C
Warping
Rated
Strength
Bending Strength: (100.00 MPa)
Creep Resistance
Rated
Heat Resistance
Heat Resistance Temp: 100°C
Features
- Glass fiber reinforced ABS. Improved dimensional stability.
- For industrial parts
- Excellent heat resistance
Basic Information
Classification:Advanced
Base Resin:Acrylonitrile Butadiene Styrene + Glass Fiber
Melting Point:220-240°C
Density:1.15-1.20 g/cm³
Shrinkage Rate:0.3-0.5%
Heat Resistance:95-105°C
Recommended Settings
| Item | Recommended Value | Notes |
|---|---|---|
| Nozzle Temperature | 245-265°C | Higher than standard ABS |
| Bed Temperature | 95-110°C | High temp to prevent warping |
| Fan Setting | 0-20% | Prioritize layer adhesion |
| Print Speed | 30-50mm/s | Quality focused |
| Nozzle Diameter | 0.4mm or larger | Hardened steel required |
| Caution | Enclosed chamber recommended, ventilation required | |
Bending Strength
| Item | Measured Value |
|---|---|
| Default (Flat Layout) | |
| Bending Strength | 100 MPa |
| Flexural Modulus | N/A |
| Test Method | 3-Point Bending Test（Details） |
Stress–Strain Curve
Bending test data for this filament has not been registered yet.
The graph will be displayed once data is added.
Use Cases
Suitable Applications
- • Industrial parts
- • Automotive parts
- • Jigs & tools
- • Structural parts
Pros & Cons
Pros: Dimensional stability, heat resistance, high strength
Cons: Nozzle wear, rough surface, expensive
Precautions
• Hardened nozzle recommended.
• Enclosed chamber printing recommended.
• Toxic fumes; ventilation required.