PC-CF (Carbon Fiber Reinforced Polycarbonate)
Performance Rating
Compare All Filaments →Rated on 5 criteria: print temperature, warping, strength, creep resistance, and heat resistance (★1-5).
Print Temp
Nozzle: 270-320°C
Bed: 100-120°C
Warping
Rated
Strength
Bending Strength: (140.00 MPa)
Creep Resistance
Rated
Heat Resistance
Heat Resistance Temp: 135°C
Features
- Carbon fiber reinforced PC. Ultra-high strength.
- Aerospace grade
- Excellent heat resistance and rigidity
Basic Information
Classification:Advanced
Base Resin:Polycarbonate + Carbon Fiber
Melting Point:260-280°C
Density:1.15-1.20 g/cm³
Shrinkage Rate:0.4-0.6%
Heat Resistance:130-140°C
Recommended Settings
| Item | Recommended Value | Notes |
|---|---|---|
| Nozzle Temperature | 270-290°C | High-temp hotend required |
| Bed Temperature | 110-130°C | High temp to prevent warping |
| Fan Setting | 0-10% | Prioritize layer adhesion |
| Print Speed | 20-40mm/s | Quality priority |
| Nozzle Diameter | 0.4mm or larger | Hardened steel required |
| Caution | Enclosed chamber required, drying required | |
Bending Strength
| Item | Measured Value |
|---|---|
| Default (Flat Layout) | |
| Bending Strength | 140 MPa |
| Flexural Modulus | N/A |
| Test Method | 3-Point Bending Test（Details） |
Stress–Strain Curve
Bending test data for this filament has not been registered yet.
The graph will be displayed once data is added.
Use Cases
Suitable Applications
- • Aerospace parts
- • High-performance jigs
- • Heat-resistant structures
- • Protective equipment
Pros & Cons
Pros: Ultra-high strength, heat resistance, lightweight, high rigidity
Cons: Difficult to print, nozzle wear, very expensive
Precautions
• Hardened nozzle required.
• Very high print temperature; limited compatible printers.
• Drying required.
• Advanced material.