PC-GF (Glass Fiber Reinforced Polycarbonate)
Performance Rating
Compare All Filaments →Rated on 5 criteria: print temperature, warping, strength, creep resistance, and heat resistance (★1-5).
Print Temp
Nozzle: 270-320°C
Bed: 100-120°C
Warping
Rated
Strength
Bending Strength: (150.00 MPa)
Creep Resistance
Rated
Heat Resistance
Heat Resistance Temp: 135°C
Features
- Glass fiber reinforced PC. Ultra-high strength and dimensional stability.
- Industrial highest grade
- Excellent heat resistance
Basic Information
Classification:Advanced
Base Resin:Polycarbonate + Glass Fiber
Melting Point:260-280°C
Density:1.20-1.25 g/cm³
Shrinkage Rate:0.3-0.5%
Heat Resistance:130-140°C
Recommended Settings
| Item | Recommended Value | Notes |
|---|---|---|
| Nozzle Temperature | 275-295°C | High-temp hotend required |
| Bed Temperature | 110-130°C | High temp to prevent warping |
| Fan Setting | 0-10% | Prioritize layer adhesion |
| Print Speed | 20-40mm/s | Quality priority |
| Nozzle Diameter | 0.4mm or larger | Hardened steel required |
| Caution | Enclosed chamber required, drying required | |
Bending Strength
| Item | Measured Value |
|---|---|
| Default (Flat Layout) | |
| Bending Strength | 150 MPa |
| Flexural Modulus | N/A |
| Test Method | 3-Point Bending Test（Details） |
Stress–Strain Curve
Bending test data for this filament has not been registered yet.
The graph will be displayed once data is added.
Use Cases
Suitable Applications
- • Industrial parts
- • Automotive parts
- • Jigs & tools
- • Heat-resistant structures
Pros & Cons
Pros: Ultra-high strength, dimensional stability, heat resistance
Cons: Difficult to print, nozzle wear, rough surface, very expensive
Precautions
• Hardened nozzle recommended.
• Very high print temperature; limited compatible printers.
• Drying required.
• Advanced material.