Matte PLA
Performance Rating
Compare All Filaments →Rated on 5 criteria: print temperature, warping, strength, creep resistance, and heat resistance (★1-5).
Print Temp
Nozzle: 200-220°C
Bed: 50-60°C
Warping
Rated
Strength
Bending Strength: (48.00 MPa)
Creep Resistance
Rated
Heat Resistance
Heat Resistance Temp: 55°C
Features
- Matte finish. Layer lines less visible, premium look.
- Subdued texture
- Fingerprints less visible
Basic Information
Classification:Beginner
Base Resin:Polylactic Acid + Matte Additives
Melting Point:150-160°C
Density:1.24 g/cm³
Shrinkage Rate:0.3-0.5%
Heat Resistance:50-60°C
Recommended Settings
| Item | Recommended Value | Notes |
|---|---|---|
| Nozzle Temperature | 200-220°C | Slightly higher than standard PLA |
| Bed Temperature | 50-60°C | Same as standard PLA |
| Fan Setting | 80-100% | From layer 2 |
| Print Speed | 40-60mm/s | 40mm/s for quality |
| Nozzle Diameter | 0.4mm | Standard setting |
| Caution | Sensitive to moisture, sealed storage recommended | |
Bending Strength
| Item | Measured Value |
|---|---|
| Default (Flat Layout) | |
| Bending Strength | 48 MPa |
| Flexural Modulus | N/A |
| Test Method | 3-Point Bending Test（Details） |
Stress–Strain Curve
Bending test data for this filament has not been registered yet.
The graph will be displayed once data is added.
Use Cases
Suitable Applications
- • Prototypes
- • Interior items
- • Architectural models
- • Display models
Pros & Cons
Pros: Premium look, layer lines less visible, easy printing
Cons: Slightly lower strength, limited color options
Precautions
• Slightly more brittle than standard PLA; use caution for functional parts.
• Slightly higher print temperature improves finish.