PLA+
Performance Rating
Compare All Filaments →Rated on 5 criteria: print temperature, warping, strength, creep resistance, and heat resistance (★1-5).
Print Temp
Nozzle: 200-230°C
Bed: 50-60°C
Warping
Rated
Strength
Bending Strength: 78.59 MPa
Creep Resistance
Rated
Heat Resistance
Heat Resistance Temp: 60°C
Features
- Higher impact resistance than standard PLA
- Improved layer adhesion
- Maintains PLA ease of use
- Enhanced mechanical strength
- Slightly higher heat resistance
- Excellent surface finish
Basic Information
Classification:Beginner
Base Resin:Modified Polylactic Acid
Melting Point:160-170°C
Density:1.25 g/cm³
Shrinkage Rate:0.3-0.4%
Heat Resistance:60-70°C
Recommended Settings
| Item | Recommended Value | Notes |
|---|---|---|
| Nozzle Temperature | 200-230°C | Higher than standard PLA |
| Bed Temperature | 50-70°C | Improved adhesion |
| Fan Setting | 80-100% | From layer 2 |
| Print Speed | 40-70mm/s | Faster than standard PLA |
| Nozzle Diameter | 0.4mm | Standard setting |
| Caution | Moisture sensitive, temperature adjustment important | |
Bending Strength
| Item | Measured Value |
|---|---|
| Default (Flat Layout) | |
| Bending Strength | 78.59 MPa |
| Flexural Modulus | 2890 MPa |
| Test Method | 3-Point Bending Test（Details） |
Stress–Strain Curve
Bending test data for this filament has not been registered yet.
The graph will be displayed once data is added.
Derivatives & Variations
PLA+ Pro
Further enhanced PLA+. Higher impact and heat resistance.
PLA+ Tough
Toughness-focused formulation. Bend-resistant, suitable for mechanical parts.
Use Cases
Suitable Applications
- • Functional prototypes
- • Tools & jigs
- • Durable parts
- • Thin-walled structures
- • Moving parts
- • Cases & enclosures
Pros & Cons
Pros: High strength, easy to use, good finish
Cons: More expensive than standard PLA, requires temperature adjustment
Precautions
• Higher temperature settings required than standard PLA.
• Properties vary by brand, test prints recommended.
• Moisture sensitive, store in sealed container.
• Strong layer adhesion, be careful when removing supports.