PLA PRO
Performance Rating
Compare All Filaments →Rated on 5 criteria: print temperature, warping, strength, creep resistance, and heat resistance (★1-5).
Print Temp
Nozzle: 205-225°C
Bed: 50-60°C
Warping
Rated
Strength
Bending Strength: 72.92 MPa
Creep Resistance
Rated
Heat Resistance
Heat Resistance Temp: 70°C
Features
- High strength and toughness. Suitable for functional parts.
- Excellent layer adhesion
- Improved impact resistance
Basic Information
Classification:Beginner
Base Resin:Polylactic Acid (Enhanced)
Melting Point:155-165°C
Density:1.24 g/cm³
Shrinkage Rate:0.3-0.4%
Heat Resistance:55-65°C
Recommended Settings
| Item | Recommended Value | Notes |
|---|---|---|
| Nozzle Temperature | 205-225°C | Higher than standard PLA |
| Bed Temperature | 55-65°C | For improved adhesion |
| Fan Setting | 80-100% | From layer 2 |
| Print Speed | 40-70mm/s | Faster than standard PLA OK |
| Nozzle Diameter | 0.4mm | Standard setting |
| Caution | Sensitive to moisture, sealed storage recommended | |
Bending Strength
| Item | Measured Value |
|---|---|
| Default (Flat Layout) | |
| Bending Strength | 72.92 MPa |
| Flexural Modulus | 2593 MPa |
| Z-Axis Strength (Vertical Layout) | |
| Bending Strength | 37.57 MPa |
| Flexural Modulus | 2192 MPa |
| Test Method | 3-Point Bending Test（Details） |
Stress–Strain Curve
Bending test data for this filament has not been registered yet.
The graph will be displayed once data is added.
Use Cases
Suitable Applications
- • Functional parts
- • Jigs & tools
- • Snap-fit parts
- • Durable parts
Pros & Cons
Pros: High strength, high toughness, easy printing, PLA-like ease of use
Cons: Slightly expensive, heat resistance similar to standard PLA
Precautions
• Slightly higher print temperature recommended than standard PLA.
• Heat resistance similar to standard PLA; not suitable for high-temperature environments.